Our own implementation of the classic SNAP exhaust trim which is made from 316L stainless steel which we then mirror polish.

Developed in the 60s and fitted to GT racers, the exhaust gases exit around the outside of the centre bore which is ventilated through the side ‘eye’ slots. At high speeds the centre bore causes a vacuum and draws the exhaust gasses out faster (at least that was the theory anyway!). A fabulous finishing touch but not for everyone’s budget, having said that we believe ours are probably the best priced on the market. We have recently re-tooled for this item to make it much closer in appearance to the original and this has helped us to keep the costs down.

The main image on the car shows our original SNAP which is no longer available, the new model is shown on the images with the blue and green backgrounds.

Occasionally we have stock of these beauties, otherwise the leadtime is around 4-6 weeks. The SNAPs are designed to fit onto an exhaust pipe which has an outside diameter of 2 inches (50.8mm). There is a stop 35mm into the SNAP to dissuade you from inserting the SNAP too far on to the exhaust pipe.

In stock (can be backordered)